Accessory Drive Belt

Removal

NOTICE: Under no circumstances should the accessory drive belt, tensioner or pulleys be lubricated as potential damage to the belt material and tensioner damping mechanism will occur. Do not apply any fluids or belt dressing to the accessory drive belt or pulleys.

1. With the vehicle in NEUTRAL, position it on a hoist.
   Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
   

1. Install the following items:
   • General Equipment : Trolley Jack
     General Equipment : Wooden Block

Installation

1. Torque : 48 Nm

1. Torque : 10 Nm

1. 1. Torque : 115 Nm
   2. Finger tight.
      
   3. Finger tight.
      

1. Remove the following items:
   • General Equipment : Trolley Jack
     General Equipment : Wooden Block

1. 1. Torque : 90 Nm
   2. Torque : 90 Nm

1. Torque : 9 Nm

Copyright © Ford Motor Company