Transmission Fluid Auxiliary Pump

Removal

WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
   

1. Torque : 9 Nm

Installation

1. To install, reverse the removal procedure.
   

1. Fill the transmission fluid.
   Refer to: Transmission Fluid Level Check (307-01 Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F35, General Procedures).
   

1. Using a diagnostic scan tool, cycle the transmission fluid auxiliary pump "ON" for 30 seconds.
   

Copyright © Ford Motor Company