501-10A Front Seats 2013 - 2014 Fusion
Removal and Installation Procedure revision date: 09/26/2012

Front Seat

Removal

NOTE: Driver seat shown, passenger seat similar.

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Ignition must remain OFF until repair is complete. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment.

    Turn the ignition OFF and wait at least one minute.
  1. If a seat side airbag SRS fault is present, depower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).

Installation

  1. Torque : 47.5 Nm
  1. If the SRS has been depowered, repower the SRS .
    Refer to: Supplemental Restraint System (SRS) Depowering and Repowering (501-20B Supplemental Restraint System, General Procedures).
  1. Torque : 47.5 Nm