303-00 Engine System - General Information 2013 - 2014 Fusion
General Procedures Procedure revision date: 08/28/2012

Powertrain/Drivetrain Mount Neutralizing

NOTE: Refer to the appropriate section and procedure for special instructions on loosening and tightening mount fasteners.

  1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  1. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
  1. Lower the vehicle.

  1. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
  1. Raise and support the vehicle.
  1. Tighten the powertrain/drivetrain mount fasteners.
  1. Lower the vehicle.
  1. Test the system for normal operation.


Copyright © Ford Motor Company