206-05 Parking Brake and Actuation 2013 - 2014 Fusion
Removal and Installation Procedure revision date: 08/28/2012

Parking Brake Switch

Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. On both sides.

Installation

  1. To install, reverse the removal procedure.

  1. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the ABS module. Perform the following step to restore the EPB system and clear the ABS module DTC .

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.


Copyright © Ford Motor Company