501-16 Wipers and Washers 2013 - 2014 Fusion
Removal and Installation Procedure revision date: 11/7/2012

Windshield Wiper Pivot Arm

Removal

NOTE: LH side shown, RH side similar.

  1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. General Equipment : Two Leg Puller

Installation

    1. NOTE: The ignition switch must remain ON during installation of wiper pivot arms.

      -
    1. Cycle the wipers ON for one complete cycle then turn the wipers OFF.
    1. NOTE: LH windshield wiper blade is always positioned above the RH windshield wiper blade.

      Align windshield wiper blade with the two marks on the windshield.
    1. Torque : 30 Nm