206-04 Rear Disc Brake 2013 - 2014 Fusion
Removal and Installation Procedure revision date: 04/9/2013

Brake Disc

Removal

NOTE: Removal steps in this procedure may contain installation instructions.

  1. WARNING: Service actions on vehicles equipped with electronic parking brakes may cause unexpected parking brake application, which could result in injury to hands or fingers. Put the electronic parking brake system into service mode prior to servicing or removing rear brake components. Failure to follow this instruction may result in serious personal injury.

    Refer to: Electronic Parking Brake (EPB) Service Mode Activation and Deactivation (206-05 Parking Brake and Actuation, General Procedures).
  1. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
  1. Relocate and support the component. Discard the specified component. Follow local disposal regulations.
    Torque : 90 Nm

Installation

  1. NOTICE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.

    To install, reverse the removal procedure.