303-00 Engine System - General Information	2013 - 2014 Fusion
General Procedures	Procedure revision date: 08/28/2012

Valve Guide Inner Diameter

NOTE: Refer to the appropriate Section 303-01 for the specification.

NOTE: Valve guides tend to wear in an hourglass pattern. The ball gauge can be inserted into the combustion chamber side of the valve guide, if necessary.
- Use a ball gauge to determine the inside diameter of the valve guides in 2 directions at the top, middle and bottom of the valve guide.
- Measure the ball gauge with a micrometer.
- If the valve guide is not within specifications, install a new cylinder head assembly.