Front Stabilizer Bar

Removal

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
   

1. Refer to: Front Subframe (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation).
   

Installation

1. NOTICE: Do not use any lubrication on the stabilizer bar or the bushings or damage to the bushings may occur.

   NOTE: Stabilizer bar bushings must be installed with slits facing the rear of the vehicle.

1. Torque : 165 Nm

1. Refer to: Front Subframe (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation).
   

Copyright © Ford Motor Company